The essential flat roofing materials checklist for builders
Nothing derails a roofing job faster than discovering halfway through that an essential trim, outlet or tub of adhesive was never ordered. When writing out a flat-roofing materials list, builders need to start with the specification rather than just how many square metres the roof covers – considering everything from the deck and drainage to insulation and waterproofing details. Here’s a practical checklist to run through before placing the order.
Start with the roof design, deck and drainage requirements
Before you start counting membrane rolls or insulation boards, get a good grasp on what you’re building. Confirm the roof construction and specified deck material, then check the falls, drainage points, upstands and other key details. Flat roofs must achieve a minimum completed fall of 1:80, and the design fall should account for factors such as deck deflection and construction tolerances. Also, don’t forget to map out outlets, gutters and other drainage components since this impacts the quantity of materials and the products you’ll need to order.
Primers and tapes: Order a complete waterproofing system
Felt, EPDM and GRP roofing don’t come with the same shopping list. An EPDM roof may require the membrane plus compatible deck and contact adhesives, tapes, primers, trims and detailing products. In contrast, GRP roofing systems usually need resin, fibreglass matting, topcoat and compatible trims and accessories. Mixing incompatible products can create problems with installation and performance so check the specification and calculate the enire system rather than ordering the main covering and improvising the rest on site.
Insulation and roof detailing: Calculate the complete build-up before ordering
When it comes to insulation, the required product and thickness will depend on the roof construction, project specification and thermal performance requirements. It’s important to first check any requirements and specifications laid out in building regulations. And don’t forget to factor in the surrounding details – a thicker insulation build-up will impat upstands, thresholds and perimeter detailing, so establish the complete roof depth before materials arrive.
Trims and outlets: Make sure your order includes small roof details
Before you place the final order, walk through the installation in sequence and note every component you’ll touch – including perimeter trims, wall and abutment details, outlets, adhesives, fixings, tapes and sealants. Then check the consumables and tools that the manufacturer has specified – you don’t want delays because you run out of resin or find out that you ordered the incorrect trim.
Make the materials list part of the job
Think of a good flat-roof order as mirroring the final construction itself – every layer and detail should work together. Start with the specification, calculate the complete build-up and waterproofing system, then finish off with a line-by-line check of any smaller components. This preparation gives your team a better chance of getting from bare deck to finished roof without an emergency trip to buy more materials.